Construction :
Internal MOC – SS 304 (Matt Finish). External MOC – SS 304 (Matt Finish) Or Mild Steel Powder Coated. Phonix Chamber are insulated with PUF & Design for better uniformity throughout the chamber with help of air flow system. And also design for fast recovery of temperature and humidity. Chamber are leak proof with magnetic
gasket & safe with door lock. And full length inner glass door for observation.
Cooling System :
Inbuit Hermetically Sealed Compressor with CFC free refrigerant 134A.
Heating System :
Long lasting SS tubular heaters
Humidity system :
It consists of Boiler tank & reservoir tank. Boiler tank consists of two heaters if one
fails it can be switch over to stand by. Both tanks have magnetic level switch for
safety of heaters. It cut off the supply of heater at low water level.
Control System :Auto tune PID controller with temp & humidity sensor with printing facility
Temp.Range :
20°c to 60°C Humidity Range : 40% To 95%RH
Alarms/Events :
Temperature and humidity deviation for each sensor. Water levels low for each tank. Door open, Mains Fail
Features :
Stands by cooling system with auto changeover (optional and only for 800 Ltrs above Model). Stand by humidity system with auto changeover. Mobile SMS facility through software(Optional). Drainage evaporation system & Electronic door lock with user level & password facility(Optional).
Safety :
Safety Controller as well user well as HI/LOW Thermostat for in case of any electronic malfunction.
Power Supply :
230VAC. 50Hz, Mains.
Model
Iner size (L x W x H)mm
Eternal Size (L x W x H)mm
Capacity Cu.Ft / Ltrs.
Trays
Tray Size
SCS200M4/S4
500 x 530 x 750
950 x 690 x 1300
7.0 / 200
2
460 x 490
SCS350M4/S4
600 x 600 x 1000
1050 x 760 x 1550
12.5 / 350.
3
560 x 560
SCS450M4/S4
650 x 650 x 1050
1100 x 810 x 1600
16.0 / 450
4
610 x 610
SCS600M4/S4
650 x 750 x 1250
1100 x 910 x 1800
21.0 / 600
4
610 x 710
SCS800M4/S4
760 x 760 x 1400
1250 x 920 x 2000
28.0 / 800
5
720 x 720
SCS1KM4/S4
800 x 820 x 1500
1290 x 980 x 2100
35.0 / 1000
6
760 x 780
Optional
Sr.No.
Specification
1
Extra Temp. & Humidity sensor
2
Extra Performed stainless steel tray
Note: M4- Models are standard model Inner SS304 Matt Finish & Exterior M.S. Powder Coated
S4- Models are G.M.P Models Inner SS304 Matt Finish & Exterior SS304 Matt Finish